-
The #101 All-Purpose Surface Sanitizer Solution is an anti-microbial surface disinfectant to be used on non-wood surfaces, such as glass, plastic, and metal. Pour onto a non-wood surface directly or using a paper towel or rag. Wipe down the surface thoroughly until it is clean and dry.
-
The #175 Mirror-Backing Paint is a resilient, dark gray to black, unleaded, air-dried paint used to add an extra layer as a tough top coat over the Copper Tite Vehicle #3 (with or without copper powder). This paint cannot be applied directly to silver. Apply with the usual methods of brush, spray, roller or curtain coating. This semi-gloss paint is a high solids paste and is economical to use. May be thinned with #178 Mirror-Backing Thinner. Use a thinning ratio of between 2:1 to 1:1 paint paste to thinner. Approximate coverage is 650 Square feet per gallon.
-
The #178 Mirror Backing Thinner is a mineral spirits blend to be used with #175 Mirror Backing Paint for reduction and clean up.UPS requires an additional hazardous materials fee for one gallon or larger containers. UPS also requires special spill-resistant packaging for one gallon or larger containers. You can avoid these fees if you order in quarts.
-
The #281 Standard & Mirror Backing Thinner is a specially-refined form of xylene for use with the Copper Tite Vehicle #3, Permalac products, and other standard backing paints. Use when the ambient temperature is 50°F to 65°F. Thin Pemalac Original, EF 20% when spraying. No thinner will be needed for brushing unless you notice brush strokes or irregularities.UPS requires an additional hazardous materials fee for one gallon or larger containers. UPS also requires special spill-resistant packaging for one gallon or larger containers. You can avoid these fees if you order in quarts.
-
The #390 Gray Mirror-Backing Paint is specially formulated to serve as a protective coating on silver for decorative applications. This high-solids (more than 60%), lead-free coating can be applied directly on silver or on top of copper to provide superior protection for silver from corrosion. The paint can be applied using brush, spray, roller, or curtain coating. May be thinned with a variety of solvents (#281, #178 or xylene) to meet stringent air quality standards. Use a thinning ratio of between 2:1 and 1:1 paint to thinner. Approximate coverage is 500 square feet per gallon.
-
The #500 Retarding Thinner is a Glycol Ether solvent added to a paint mix to retard its drying time in hot weather applications. It should be used to extend flow time and prevent solvent blush when working in high temperatures or high relative dew points. This will make Permalac/lacquer take around an hour to set up. It can also be used as a cleaner for finishing metals. Use between 5% and 10%. Use when humidity exceeds 85%.UPS requires an additional hazardous materials fee for one gallon or larger containers. UPS also requires special spill-resistant packaging for one gallon or larger containers. You can avoid these fees if you order in quarts.
-
#69 Thinner is a medium speed lacquer thinner. Use when the ambient temperature is 66°F to 85°F. When spraying, thin 20%. If the Permalac is drying too quickly, and you notice blush or any other adverse effects, you can increase this to 30%. When brushing, thin 10%.UPS requires an additional hazardous materials fee for one gallon or larger containers. UPS also requires special spill-resistant packaging for one gallon or larger containers. You can avoid these fees if you order in quarts.
-
The #87 Degreaser Solution is a highly concentrated liquid cleaner and degreaser used for cleaning glass and plastic surfaces. It has been shown to remove hard to remove oils, organic residues, and fingerprints from a variety of ceramic, and plastic surfaces.
-
Peacock #93 Sensitizer Solution is formulated specifically for hard-to-wet surfaces such as waxes, plastics, rubber, and silk screen inks. This liquid concentrate is excellent on old and new glass. It can also be used on silvering conveyors with long "laytime" between the tin rinse and the silvering section. #93 Sensitizer Solution is a concentrate. Make sure to use 2-4 ounces with 1 gallon of deionized water. The amount of wetting required will determine the exact mix.#93 has a shelf life of 6 months. Keep the bottle tightly capped and in a cool dark place. A diluted solution has a pot life of 24 hours and must be made fresh daily.5-gallon pails of this item must ship as hazardous and are assessed additional hazmat fees.
-
The C-22 Wetting Agent is a concentrated solution recommended for silvering applications on hard-to-wet surfaces such as acrylics, silicone rubber, etc. This agent is usually applied prior to sensitization.
-
Peacock Cerium Oxide (CeO) #90 is formulated with a slightly lower cerium content and without the suspension treatment. This material is cost effective for a variety of applications, including flat glass, mirrors, TV/CRT face plates, windshields, and precision cleaning. Stock removal rates and surface quality yields are excellent. Average particle size is 3.4 microns with a pH value of 6.5.
-
Peacock Copper Powder is a specially prepared powder made from copper metal. Use with Copper Tite Vehicle #3 in the Peacock non-electrolytic copper mirror backing process. Recommended mix: 6 pounds Copper Powder to 4 gallons Copper Tite Vehicle #3.This item must ship as hazmat goods and is assessed an additional hazmat fee.
-
Copper-Tite Vehicle #3 is a crystal-clear, durable air-dry lacquer that provides superior tarnish protection and remarkable resistance to salt-air atmosphere as well as superior resistance to ultra-violet light. Formulated without harmful organic compounds, it has special ingredients that chemically bond to the copper or the silver layer of a mirror. It can be used in different ways as a mirror backing paint. Used alone as a clear finish, a one way mirror is created. On antique mirrors where the copper layer must not show through, it can be used as a "copper-free" prime coat followed by a top coat of, for example, the #175 mirror backing. When it is mixed with the Peacock Copper Powder, it forms the basis of Peacock's non-electrolytic copper backing process. In this process, a specially prepared copper powder is dispersed in the copper-tite vehicle and then sprayed onto silver forming a copper-polymer prime coat. Top with #175 Mirror Backing Paint. Thin with #281 Standard Thinner.
-
Deionized water for use in dilutions for silvering and related chemical processes. When possible, deionized water should be used when silvering.
-
The deluxe spray gun repair kit contains parts used to repair the older Deluxe Silver Spray Gun model (no longer sold). It contains the following parts:
Standard U-3687 - PTFE packing assembly for silvering gun 2 ea Standard U-3664 - PTFE piston assembly for silvering gun 2 ea Standard U-3677 - Needle for new standard silvering gun 2 ea Standard U-0 - U-0 Fluid Tips 2 ea Standard U-2500 - U 2500 Springs 2 ea -
Peacock H-41 Sensitizer Solution is an excellent choice for its wetting and sensitizing properties. Two benefits of its formulation are: a long shelf life (over one year) and less concentrate is needed. Dilute 2-4 ounces of H-41 concentrate in one gallon of deionized water.5-gallon pails of this item must ship as hazardous and are assessed additional hazmat fees.
-
A high efficiency (HE), 3-part pouring silver system used extensively by the hand silvering and recording industries. Due to its enhanced glass adhesion, it deposits more silver with less waste. The slower deposit rate of this system is ideal for the inside of blown glass, bottles, and glass aggregates. It tends to produce a “warmer”-toned, yet robust silver. Good for antiquing. Kits consist of He-300 A Silver Solution, He-300 B Activator Solution, He-300 C Reducer Solution, and #93 Sensitizer Solution. Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser, polishing compound of choice, and mirror backing paint of choice. Available in the following sizes:
HE-300 3-Part Silvering Series (1 Gallon; 3800 SF Kit) He-300 3-Part Silvering Series (1 oz; 30 SF Kit) HE-300 3-Part Silvering Series (1 Pint; 480 SF Kit) He-300 3-Part Silvering Series (2 oz; 60 SF Kit) HE-300 3-Part Silvering Series (4 Oz; 120 SF Kit) HE-300 3-Part Silvering Series (5 Gallon; 19000 SF Kit) HE-300 3-Part Silvering Series (8 Oz; 240 SF Kit) -
A high efficiency (HE), 3-part pouring silver system used extensively by the hand silvering and recording industries. Due to its enhanced glass adhesion, it deposits more silver with less waste. The slower deposit rate of this system is ideal for the inside of blown glass, bottles, and glass aggregates. It tends to produce a “warmer”-toned, yet robust silver. Good for antiquing. Kits consist of He-300 A Silver Solution, He-300 B Activator Solution, He-300 C Reducer Solution, and #93 Sensitizer Solution. When purchasing separately, please note that the He-300 A Silver is designed to pair with the other recommended solutions in the suite. Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser & Red Rouge Available in the following sizes:
He-300 A Silver Solution (1 Gallon) HE300A1G gal He-300 A Silver Solution (1 oz) HE300A1OZ 1 oz He-300 A Silver Solution (1 Pint) HE300A1P Pint He-300 A Silver Solution (2 oz) HE300A2OZ 2 oz He-300 A Silver Solution (4 oz) HE300A4OZ 4 oz bottl He-300 A Silver Solution (5 Gallons) HE300A5G 5G Pail He-300 A Silver Solution (8 oz) HE300A8OZ 8 oz -
A high efficiency (HE), 3-part pouring silver system used extensively by the hand silvering and recording industries. Because of its improved glass adhesion, it deposits more silver with less waste. The slower deposit rate of this system is ideal for the inside of blown glass, bottles, and glass aggregates. It tends to produce a “warmer” toned, but robust silver. Good for antiquing. Kits consist of He-300 A Silver Solution, He-300 B Activator Solution, He-300 C Reducer Solution, and #93 Sensitizer Solution. If purchasing separately, do keep in mind this He-300 B Activator is designed to pair with the other recommended solutions in the suite.Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser & Red RougeThis item must ship as corrosive and is assessed an additional hazmat fee on gallons and larger sizes.
-
A high efficiency (HE), 3-part pouring silver system used extensively by the hand silvering and recording industries. Because of its improved glass adhesion, it deposits more silver with less waste. The slower deposit rate of this system is ideal for the inside of blown glass, bottles, and glass aggregates. It tends to produce a “warmer” toned, but robust silver. Good for antiquing. Kits consist of He-300 A Silver Solution, He-300 B Activator Solution, He-300 C Reducer Solution, and #93 Sensitizer Solution. If purchasing separately, do keep in mind this He-300 C Reducer is designed to pair with the other recommended solutions in the suite.Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser & Red Rouge
