This item must ship as a hazmat good and is assessed an additional hazmat fee.
-
Copper-Tite Vehicle #3 is a crystal-clear, durable air-dry lacquer that provides superior tarnish protection and remarkable resistance to salt-air atmosphere as well as superior resistance to ultra-violet light. Formulated without harmful organic compounds, it has special ingredients that chemically bond to the copper or the silver layer of a mirror. It can be used in different ways as a mirror backing paint. Used alone as a clear finish, a one way mirror is created. On antique mirrors where the copper layer must not show through, it can be used as a "copper-free" prime coat followed by a top coat of, for example, the #175 mirror backing. When it is mixed with the Peacock Copper Powder, it forms the basis of Peacock's non-electrolytic copper backing process. In this process, a specially prepared copper powder is dispersed in the copper-tite vehicle and then sprayed onto silver forming a copper-polymer prime coat. Top with #175 Mirror Backing Paint. Thin with #281 Standard Thinner.
-
The #500 Retarding Thinner is a Glycol Ether solvent added to a paint mix to retard its drying time in hot weather applications. It should be used to extend flow time and prevent solvent blush when working in high temperatures or high relative dew points. This will make Permalac/lacquer take around an hour to set up. It can also be used as a cleaner for finishing metals. Use between 5% and 10%. Use when humidity exceeds 85%.UPS requires an additional hazardous materials fee for one gallon or larger containers. UPS also requires special spill-resistant packaging for one gallon or larger containers. You can avoid these fees if you order in quarts.
-
The #175 Mirror-Backing Paint is a resilient, dark gray to black, unleaded, air-dried paint used to add an extra layer as a tough top coat over the Copper Tite Vehicle #3 (with or without copper powder). This paint cannot be applied directly to silver. Apply with the usual methods of brush, spray, roller or curtain coating. This semi-gloss paint is a high solids paste and is economical to use. May be thinned with #178 Mirror-Backing Thinner. Use a thinning ratio of between 2:1 to 1:1 paint paste to thinner. Approximate coverage is 650 Square feet per gallon.
-
Plastic quart siphon bottle assembly with fittings that connect it to the fluid inlets of our spray guns. Stainless steel parts for spraying corrosive liquids.
-
Hydrochloric Acid (37% Reagent-Grade): When used for stripping silver, hydrochloric acid forms a water-insoluble white precipitate that is easily removed from waste water. Proper ventilation is required by the user to handle the corrosive fumes associated with hydrochloric acid.This item must ship as corrosive and is assessed an additional hazmat fee.
-
Peacock Cerium Oxide (CeO) #90 is formulated with a slightly lower cerium content and without the suspension treatment. This material is cost effective for a variety of applications, including flat glass, mirrors, TV/CRT face plates, windshields, and precision cleaning. Stock removal rates and surface quality yields are excellent. Average particle size is 3.4 microns with a pH value of 6.5.
-
Iron Powder for use with mirror backing and/or copper plating prior to mirror backing.This item must ship as a hazmat good and is assessed an additional hazmat fee.
-
Peacock H-41 Sensitizer Solution is an excellent choice for its wetting and sensitizing properties. Two benefits of its formulation are: a long shelf life (over one year) and less concentrate is needed. Dilute 2-4 ounces of H-41 concentrate in one gallon of deionized water.5-gallon pails of this item must ship as hazardous and are assessed additional hazmat fees.
-
The sensitizer spray gun repair kit contains parts used to repair Sensitizer Spray Gun models. It contains the following parts:
Standard U-0 - U-0 Fluid Tips 1 ea Sale Standard U-203 - U-203 Packing Glands 1 ea Sale Standard U-2500 - U 2500 Springs 1 ea Sale Standard U-30 - U- 30 Springs 1 ea Sale Standard U-29 - U-29 Packing Glands 1 ea Sale Standard U-33 Springs - U-33 Springs 1 ea Sale Standard U-28-12 - U-28- 12 Packing Washers (per Dozen) 1 ea Sale Standard U-31Spring Seats - U-31 Spring Seats 1 ea Sale -
The PChrome Tints Pack contains 4 oz bottles of each of the follow tints: gold, copper, red, black, and blue. These tints are colorfast, will not fade, and can be mixed to make custom colors. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
-
Stannous Chloride (Tin Chloride) CrystalsThis item must ship as a hazmat good and is assessed an additional hazmat fee.
-
Sodium Hydroxide Pellets (5 Pound Bag)This item must ship as a hazmat good and is assessed an additional hazmat fee.
-
The deluxe spray gun repair kit contains parts used to repair the older Deluxe Silver Spray Gun model (no longer sold). It contains the following parts:
Standard U-3687 - PTFE packing assembly for silvering gun 2 ea Standard U-3664 - PTFE piston assembly for silvering gun 2 ea Standard U-3677 - Needle for new standard silvering gun 2 ea Standard U-0 - U-0 Fluid Tips 2 ea Standard U-2500 - U 2500 Springs 2 ea -
The standard spray gun repair kit contains parts used to repair the Standard Silvering Spray Gun model. It contains the following parts:
Standard U-3687 - PTFE packing assembly for silvering gun 2 ea Standard U-3664 - PTFE piston assembly for silvering gun 2 ea Standard U-3677 - Needle for new standard silvering gun 2 ea Standard U-0 - U-0 Fluid Tips 2 ea Standard U-2500 - U 2500 Springs 2 ea -
The standard spray gun repair kit contains parts used to repair older Standard Silvering Spray Gun models. It contains the following parts:
Standard U-0 - U-0 Fluid Tips 2 ea Standard AU-31/32 Needles - AU-31/32 Needles 1 ea Standard U-2 -3/8 - U-2-3/8" Needle 1 ea Standard U-2500 - U 2500 Springs 2 ea Standard U-30 - U- 30 Springs 2 ea Standard U-33 Springs - U-33 Springs 1 ea Standard U-29 - U-29 Packing Glands 2 ea Standard U-203 - U-203 Packing Glands 1 ea Standard U-28-12 - U-28- 12 Packing Washers (per Dozen) 1 ea Standard U-31Spring Seats - U-31 Spring Seats 1 ea Standard U-2505 - U 2505 Piston Assembly 1 ea -
R-240 is a concentrated reducing agent for electroplating. It can be used with the S-30 silvering solution.
-
The Sensitizing Spray Gun is a single nozzle spray gun for applying sensitizer solution. It is made of a stainless steel fluid body to resist corrosion with acid solutions. One fluid coupling at fluid inlet for 1/4 inch tubing or one siphon bottle is needed.
-
Peacock Silver Antiquing Compound is used to give mirrored finishes an aged, antique tarnish. To create an antique finish, first create your mirrored finish. Sprinkle the antiquing compound onto the reflective surface (when wet or dry) and then apply the mirror backing paint. As the antiquing compound reacts with the mirror coat, it will "age" the finish.Antiquing compound must ship as a hazardous good and is assessed an additional hazmat fee.
-
The Standard Silvering Spray Gun is a dual-head spray gun used for spraying two materials that need to mix after spraying. Great for Chroming, Silvering Mirrors or any other dual component spraying. The wet sections are 303 Stainless Steel which allows spraying of corrosive fluids. The sprayer can be fed by siphon bottles (USP-QT), gravity fed or pressure fed from a tank. Two fluid couplings at fluid inlet, for 1/4" tubing, or two siphon bottles are needed.
