-
The #101 All-Purpose Surface Sanitizer Solution is an anti-microbial surface disinfectant to be used on non-wood surfaces, such as glass, plastic, and metal. Pour onto a non-wood surface directly or using a paper towel or rag. Wipe down the surface thoroughly until it is clean and dry.
-
The #175 Mirror-Backing Paint is a resilient, dark gray to black, unleaded, air-dried paint used to add an extra layer as a tough top coat over the Copper Tite Vehicle #3 (with or without copper powder). This paint cannot be applied directly to silver. Apply with the usual methods of brush, spray, roller or curtain coating. This semi-gloss paint is a high solids paste and is economical to use. May be thinned with #178 Mirror-Backing Thinner. Use a thinning ratio of between 2:1 to 1:1 paint paste to thinner. Approximate coverage is 650 Square feet per gallon.
-
The #178 Mirror Backing Thinner is a mineral spirits blend to be used with #175 Mirror Backing Paint for reduction and clean up.UPS requires an additional hazardous materials fee for one gallon or larger containers. UPS also requires special spill-resistant packaging for one gallon or larger containers. You can avoid these fees if you order in quarts.
-
The #281 Standard & Mirror Backing Thinner is a specially-refined form of xylene for use with the Copper Tite Vehicle #3, Permalac products, and other standard backing paints. Use when the ambient temperature is 50°F to 65°F. Thin Pemalac Original, EF 20% when spraying. No thinner will be needed for brushing unless you notice brush strokes or irregularities.UPS requires an additional hazardous materials fee for one gallon or larger containers. UPS also requires special spill-resistant packaging for one gallon or larger containers. You can avoid these fees if you order in quarts.
-
The #390 Gray Mirror-Backing Paint is specially formulated to serve as a protective coating on silver for decorative applications. This high-solids (more than 60%), lead-free coating can be applied directly on silver or on top of copper to provide superior protection for silver from corrosion. The paint can be applied using brush, spray, roller, or curtain coating. May be thinned with a variety of solvents (#281, #178 or xylene) to meet stringent air quality standards. Use a thinning ratio of between 2:1 and 1:1 paint to thinner. Approximate coverage is 500 square feet per gallon.
-
The #500 Retarding Thinner is a Glycol Ether solvent added to a paint mix to retard its drying time in hot weather applications. It should be used to extend flow time and prevent solvent blush when working in high temperatures or high relative dew points. This will make Permalac/lacquer take around an hour to set up. It can also be used as a cleaner for finishing metals. Use between 5% and 10%. Use when humidity exceeds 85%.UPS requires an additional hazardous materials fee for one gallon or larger containers. UPS also requires special spill-resistant packaging for one gallon or larger containers. You can avoid these fees if you order in quarts.
-
#69 Thinner is a medium speed lacquer thinner. Use when the ambient temperature is 66°F to 85°F. When spraying, thin 20%. If the Permalac is drying too quickly, and you notice blush or any other adverse effects, you can increase this to 30%. When brushing, thin 10%.UPS requires an additional hazardous materials fee for one gallon or larger containers. UPS also requires special spill-resistant packaging for one gallon or larger containers. You can avoid these fees if you order in quarts.
-
The #87 Degreaser Solution is a highly concentrated liquid cleaner and degreaser used for cleaning glass and plastic surfaces. It has been shown to remove hard to remove oils, organic residues, and fingerprints from a variety of ceramic, and plastic surfaces.
-
Peacock #93 Sensitizer Solution is formulated specifically for hard-to-wet surfaces such as waxes, plastics, rubber, and silk screen inks. This liquid concentrate is excellent on old and new glass. It can also be used on silvering conveyors with long "laytime" between the tin rinse and the silvering section. #93 Sensitizer Solution is a concentrate. Make sure to use 2-4 ounces with 1 gallon of deionized water. The amount of wetting required will determine the exact mix.#93 has a shelf life of 6 months. Keep the bottle tightly capped and in a cool dark place. A diluted solution has a pot life of 24 hours and must be made fresh daily.5-gallon pails of this item must ship as hazardous and are assessed additional hazmat fees.
-
The C-22 Wetting Agent is a concentrated solution recommended for silvering applications on hard-to-wet surfaces such as acrylics, silicone rubber, etc. This agent is usually applied prior to sensitization.
-
Peacock Cerium Oxide (CeO) #90 is formulated with a slightly lower cerium content and without the suspension treatment. This material is cost effective for a variety of applications, including flat glass, mirrors, TV/CRT face plates, windshields, and precision cleaning. Stock removal rates and surface quality yields are excellent. Average particle size is 3.4 microns with a pH value of 6.5.
-
Peacock Copper Powder is a specially prepared powder made from copper metal. Use with Copper Tite Vehicle #3 in the Peacock non-electrolytic copper mirror backing process. Recommended mix: 6 pounds Copper Powder to 4 gallons Copper Tite Vehicle #3.This item must ship as hazmat goods and is assessed an additional hazmat fee.
-
Copper-Tite Vehicle #3 is a crystal-clear, durable air-dry lacquer that provides superior tarnish protection and remarkable resistance to salt-air atmosphere as well as superior resistance to ultra-violet light. Formulated without harmful organic compounds, it has special ingredients that chemically bond to the copper or the silver layer of a mirror. It can be used in different ways as a mirror backing paint. Used alone as a clear finish, a one way mirror is created. On antique mirrors where the copper layer must not show through, it can be used as a "copper-free" prime coat followed by a top coat of, for example, the #175 mirror backing. When it is mixed with the Peacock Copper Powder, it forms the basis of Peacock's non-electrolytic copper backing process. In this process, a specially prepared copper powder is dispersed in the copper-tite vehicle and then sprayed onto silver forming a copper-polymer prime coat. Top with #175 Mirror Backing Paint. Thin with #281 Standard Thinner.
-
Deionized water for use in dilutions for silvering and related chemical processes. When possible, deionized water should be used when silvering.
-
The deluxe spray gun repair kit contains parts used to repair the older Deluxe Silver Spray Gun model (no longer sold). It contains the following parts:
Standard U-3687 - PTFE packing assembly for silvering gun 2 ea Standard U-3664 - PTFE piston assembly for silvering gun 2 ea Standard U-3677 - Needle for new standard silvering gun 2 ea Standard U-0 - U-0 Fluid Tips 2 ea Standard U-2500 - U 2500 Springs 2 ea -
Peacock H-41 Sensitizer Solution is an excellent choice for its wetting and sensitizing properties. Two benefits of its formulation are: a long shelf life (over one year) and less concentrate is needed. Dilute 2-4 ounces of H-41 concentrate in one gallon of deionized water.5-gallon pails of this item must ship as hazardous and are assessed additional hazmat fees.
-
A high efficiency (HE), 3-part pouring silver system used extensively by the hand silvering and recording industries. Due to its enhanced glass adhesion, it deposits more silver with less waste. The slower deposit rate of this system is ideal for the inside of blown glass, bottles, and glass aggregates. It tends to produce a “warmer”-toned, yet robust silver. Good for antiquing. Kits consist of He-300 A Silver Solution, He-300 B Activator Solution, He-300 C Reducer Solution, and #93 Sensitizer Solution. Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser, polishing compound of choice, and mirror backing paint of choice. Available in the following sizes:
HE-300 3-Part Silvering Series (1 Gallon; 3800 SF Kit) He-300 3-Part Silvering Series (1 oz; 30 SF Kit) HE-300 3-Part Silvering Series (1 Pint; 480 SF Kit) He-300 3-Part Silvering Series (2 oz; 60 SF Kit) HE-300 3-Part Silvering Series (4 Oz; 120 SF Kit) HE-300 3-Part Silvering Series (5 Gallon; 19000 SF Kit) HE-300 3-Part Silvering Series (8 Oz; 240 SF Kit) -
A high efficiency (HE), 3-part pouring silver system used extensively by the hand silvering and recording industries. Due to its enhanced glass adhesion, it deposits more silver with less waste. The slower deposit rate of this system is ideal for the inside of blown glass, bottles, and glass aggregates. It tends to produce a “warmer”-toned, yet robust silver. Good for antiquing. Kits consist of He-300 A Silver Solution, He-300 B Activator Solution, He-300 C Reducer Solution, and #93 Sensitizer Solution. When purchasing separately, please note that the He-300 A Silver is designed to pair with the other recommended solutions in the suite. Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser & Red Rouge Available in the following sizes:
He-300 A Silver Solution (1 Gallon) HE300A1G gal He-300 A Silver Solution (1 oz) HE300A1OZ 1 oz He-300 A Silver Solution (1 Pint) HE300A1P Pint He-300 A Silver Solution (2 oz) HE300A2OZ 2 oz He-300 A Silver Solution (4 oz) HE300A4OZ 4 oz bottl He-300 A Silver Solution (5 Gallons) HE300A5G 5G Pail He-300 A Silver Solution (8 oz) HE300A8OZ 8 oz -
A high efficiency (HE), 3-part pouring silver system used extensively by the hand silvering and recording industries. Because of its improved glass adhesion, it deposits more silver with less waste. The slower deposit rate of this system is ideal for the inside of blown glass, bottles, and glass aggregates. It tends to produce a “warmer” toned, but robust silver. Good for antiquing. Kits consist of He-300 A Silver Solution, He-300 B Activator Solution, He-300 C Reducer Solution, and #93 Sensitizer Solution. If purchasing separately, do keep in mind this He-300 B Activator is designed to pair with the other recommended solutions in the suite.Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser & Red RougeThis item must ship as corrosive and is assessed an additional hazmat fee on gallons and larger sizes.
-
A high efficiency (HE), 3-part pouring silver system used extensively by the hand silvering and recording industries. Because of its improved glass adhesion, it deposits more silver with less waste. The slower deposit rate of this system is ideal for the inside of blown glass, bottles, and glass aggregates. It tends to produce a “warmer” toned, but robust silver. Good for antiquing. Kits consist of He-300 A Silver Solution, He-300 B Activator Solution, He-300 C Reducer Solution, and #93 Sensitizer Solution. If purchasing separately, do keep in mind this He-300 C Reducer is designed to pair with the other recommended solutions in the suite.Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser & Red Rouge
-
A high efficiency (HE), 2-part sprayable silver system which produces very clear, bright silver. It is suitable for first-surface and two-way mirror applications. Will produce clean, bright film on glass, resin, and most types of plastic. Silver will not burn from over-application. Kits include He-300 A Silver Solution, He-400 R Reducer Solution, and #93 Sensitizer. Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser, polishing compound of choice, and mirror backing paint of choice Available in the following sizes:
He-400 2-Part Silvering Series (1 Gallon; 3800 SF Kit) He-400 2-Part Silvering Series (1 Pint; 480 SF Kit) He-400 2-Part Silvering Series (1/2 Gallon; 1900 SF Kit) He-400 2-Part Silvering Series (2 oz; 60 SF Kit) He-400 2-Part Silvering Series (4 oz; 120 SF Kit) He-400 2-Part Silvering Series (5 Gallon; 19000 SF Kit) He-400 2-Part Silvering Series (8 oz; 240 SF Kit) -
A high efficiency (HE), 2-part sprayable silver system which produces very clear bright silver. It is good for first surface and two-way mirror applications. Will produce clean bright film on glass, resin, and most types of plastic. Silver will not burn from over-application. Components of this system are He-300 A Silver Solution, He-400 R Reducer Solution, and #93 Sensitizer. If purchasing separately, do keep in mind this He-400 reducer is designed to pair with the other recommended solutions in the suite. Please refer to TDS and/or application instructions for details on how to apply.This item must ship as corrosive and is assessed an additional hazmat fee on gallons and larger sizes.
-
A high efficiency (HE), 2-part system, which is our most cost-effective sprayable silver system. It quickly produces clear, bright silver on glass. Kit components are He-600 S Silver Solution, He-600 R Reducer Solution, and He-600 D Sensitizer Solution. Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser, polishing compound of choice, and mirror backing paint of choice Available in the following sizes:
He-600 2-Part Silvering Series (1 gallon;3800 SF Kit) He-600 2-Part Silvering Series (1 oz; 30 SF Kit) He-600 2-Part Silvering Series (1 pint; 480 SF Kit) He-600 2-Part Silvering Series (2 oz; 60 SF Kit) He-600 2-Part Silvering Series (4 oz;120 SF) He-600 2-Part Silvering Series (5G; 19000 SF Kit) He-600 2-Part Silvering Series (8 oz; 240 SF Kit) -
A high efficiency (HE), 2-part system which is our most cost-effective sprayable silver system. It quickly produces clear bright silver on glass. The components are He-600 S Silver Solution, He-600 R Reducer Solution, and He-600 D Sensitizer Solution. This He-600 D Sensitizer Solution is designed to be used with the other components in the suite. If choosing to purchase separately, do ensure you purchase the other agents that are recommended with the suite as well. Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser & Red Rouge5-gallon pails and larger must ship as corrosive and are assessed additional hazmat fees.
-
A high efficiency (HE), 2-part system which is our most cost-effective sprayable silver system. It quickly produces clear bright silver on glass. The components are He-600 S Silver Solution, He-600 R Reducer Solution, and He-600 D Sensitizer Solution. This He-600 R Reducer Solution is designed to be used with the other components in the suite. If choosing to purchase separately, do ensure you purchase the other agents that are recommended with the suite as well. Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser & Red Rouge5-gallon pails and larger must ship as corrosive and are assessed additional hazmat fees.
-
A high efficiency (HE), 2-part system, which is our most cost-effective sprayable silver system. It quickly produces clear, bright silver on glass. The components are He-600 S Silver Solution, He-600 R Reducer Solution, and He-600 D Sensitizer Solution. This He-600 S Silver Solution is designed for use with other components in the suite. If you choose to purchase separately, ensure that you also purchase the recommended agents for the suite. Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser & Red Rouge Available in the following sizes:
He-600 S Silver Solution (1 Gallon) HE600S1G gal He-600 S Silver Solution (1 oz) HE600S1OZ 1 oz He-600 S Silver Solution (1 pint) HE600S1P Pint He-600 S Silver Solution (2 oz) HE600S2OZ 2 oz He-600 S Silver Solution (4 oz) HE600S4OZ 4 oz bottl He-600 S Silver Solution (5 Gallons) HE600S5G 5G Pail He-600 S Silver Solution (8 oz) HE600S8OZ 8 oz -
A high efficiency (HE), 2-part pouring silver system. It produces bright silver on glass in 1-2 minutes. Its components are He-650 S Silver Solution, He-650 R Reducer Solution, and He-650 D Sensitizer Solution. Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser, polishing compound of choice, and mirror backing paint of choice Available in the following sizes:
He-650 2-Part Silvering Series (1 Gallon; 3800 SF Kit) He-650 2-Part Silvering Series (1 Pint; 480 SF Kit) He-650 2-Part Silvering Series (1/2 Gallon; 1900 SF Kit) He-650 2-Part Silvering Series (10 Gallons; 38000 SF Kit) He-650 2-Part Silvering Series (2 oz; 60 SF Kit) He-650 2-Part Silvering Series (4 oz; 120 SF Kit) He-650 2-Part Silvering Series (5 Gallons; 19000 SF Kit) He-650 2-Part Silvering Series (8 Gallons; 30400 SF Kit) He-650 2-Part Silvering Series (8 oz; 240 SF Kit) -
A high efficiency (HE), 2-part pouring silver system. It produces bright silver on glass in 1-2 minutes. Its components are He-650 S Silver Solution, He-650 R Reducer Solution, and He-650 D Sensitizer Solution. This He-650 D Sensitizer Solution is designed to be used with the other components in the suite. If choosing to purchase separately, do ensure you purchase the other agents that are recommended with the suite as well. Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser & Red Rouge
-
A high efficiency (HE), 2-part pouring silver system. It produces bright silver on glass in 1-2 minutes. Its components are He-650 S Silver Solution, He-650 R Reducer Solution, and He-650 D Sensitizer Solution. This He-650 R Reducer Solution is designed to be used with the other components in the suite. If choosing to purchase separately, do ensure you purchase the other agents that are recommended with the suite as well. Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser & Red Rouge
-
A high efficiency (HE), 2-part pouring silver system. It produces bright silver on glass in 1-2 minutes. Its components are He-650 S Silver Solution, He-650 R Reducer Solution, and He-650 D Sensitizer Solution. The He-650 S Silver Solution is designed to be used in conjunction with other components in the suite. If you choose to purchase separately, ensure that you also purchase the recommended agents for the suite. Please refer to TDS and/or application instructions for details on how to apply. Recommended Supplementary Solutions: #87 Degreaser & Red Rouge Available in the following sizes:
He-650 S Pouring Silver Solution (1 Gallon) HE650S1G gal He-650 S Pouring Silver Solution (1 oz) HE650S1OZ 1 oz He-650 S Pouring Silver Solution (1 Pint) HE650S1P Pint He-650 S Pouring Silver Solution (2 oz) HE650S2OZ 2 oz He-650 S Pouring Silver Solution (8 oz) HE650S8OZ 8 oz -
Hydrochloric Acid (37% Reagent-Grade): When used for stripping silver, hydrochloric acid forms a water-insoluble white precipitate that is easily removed from waste water. Proper ventilation is required by the user to handle the corrosive fumes associated with hydrochloric acid.This item must ship as corrosive and is assessed an additional hazmat fee.
-
Iron Powder for use with mirror backing and/or copper plating prior to mirror backing.This item must ship as a hazmat good and is assessed an additional hazmat fee.
-
The L-14, N-28 System quickly produces a robust, conductive, and highly detailed film on photo-resist and other polymer substrates. The L-14 is the silver portion of the system. Recommended supplementary solutions: C-22 Wetting Agent & #93 Sensitizer Available in the following sizes:
L-14 Silver Solution (1 gallon/3.79 Liters) PEAL141G gal L-14 Silver Solution (1 oz) PEAL141OZ 1 oz L-14 Silver Solution (1 pint) PEAL141P Pint L-14 Silver Solution (2 oz) PEAL142OZ 2 oz L-14 Silver Solution (4 oz) PEAL144OZ ea L-14 Silver Solution (5 Gallons) PEAL145G 5G Pail L-14 Silver Solution (8 oz) PEAL148OZ 8 oz -
The L-19 N-26 Silver Solution Suite is the preferred silvering system for plating vinyl. The kits include L-19 Silver Solution, N-26 Reducer Solution, L-20A Silver Addition Agent, and #93 Sensitizer. Please refer to TDS and/or application instructions for details on how to apply. Highly Recommended Supplementary Solutions: #87 Degreaser & C-22 Wetting Agent Available in the following sizes:
L-19 N-26 Silver Solution Suite (1 oz; 30 SF Kit) L-19 N-26 Silver Solution Suite (2 oz; 60 SF Kit) L-19 N-26 Silver Solution Suite (4 oz; 120 SF Kit) L-19 N-26 Silver Solution Suite (8 oz; 240 SF Kit) -
The L-19 N-26 Silver Solution Suite is the preferred silvering system for plating vinyl. The components are L-19 Silver Solution, N-26 Reducer Solution, L-20A Silver Addition Agent, and #93 Sensitizer. This L-19 Silver Solution is designed for use with the other components in the suite. If you choose to purchase separately, ensure that you also purchase the recommended agents for the suite. Please refer to TDS and/or application instructions for details on how to apply. Highly Recommended Supplementary Solutions: #87 Degreaser & C-22 Wetting Agent Available in the following sizes:
L-19 Silver Solution (1 gallon/3.79 Liters) PEAL191G gal L-19 Silver Solution (1 oz) PEAL191OZ 1 oz L-19 Silver Solution (1 Pint) PEAL191P Pint L-19 Silver Solution (2 oz) PEAL192OZ 2 oz L-19 Silver Solution (4 oz) PEAL194OZ 4 oz bottl L-19 Silver Solution (8 oz) PEAl198OZ 8 oz -
The L-19 N-26 Silver Solution Suite is the preferred silvering system for plating vinyl. The components are L-19 Silver Solution, N-26 Reducer Solution, L-20A Silver Addition Agent, and #93 Sensitizer. This L-20A Silver Addition Agent is designed to be used with the other components in the suite. If choosing to purchase separately, do ensure you purchase the other agents that are recommended with the suite as well. Please refer to TDS and/or application instructions for details on how to apply. Highly Recommended Supplementary Solutions: #87 Degreaser & C-22 Wetting Agent
-
The L-400, N-400 system offers a slower, more controlled reaction than the L-14/N-28 suite, producing a robust, conductive, and highly detailed film on photoresist and other polymer substrates. It is particularly helpful for difficult-to-wet substrates and when an extremely high degree of accuracy is required. Recommended supplementary solutions: C-22 Wetting Agent & #93 Sensitizer Available in the following sizes:
L-400 Silver Solution (1 Gallon/3.79 Liters) PEAL4001G gal L-400 Silver Solution (1 oz) PEAL4001OZ 1 oz L-400 Silver Solution (1 Pint) PEAL4001P Pint L-400 Silver Solution (4 oz) PEAL4004OZ 4 oz bottl -
M-15A Silver Paint is a thick, conductive silver paint. Available in a 150-gram bottle.
-
Methanol SolutionThis item must ship as a hazmat good and is assessed an additional hazmat fee.
-
The L-19 N-26 Silver Solution Suite is the preferred silvering system for plating vinyl. The components are L-19 Silver Solution, N-26 Reducer Solution, L-20A Silver Addition Agent, and #93 Sensitizer. This N-26 Reducer Solution is designed to be used with the other components in the suite. If choosing to purchase separately, do ensure you purchase the other agents that are recommended with the suite as well. Please refer to TDS and/or application instructions for details on how to apply. Highly Recommended Supplementary Solutions: #87 Degreaser & C-22 Wetting Agent
-
The L-14, N-28 System quickly produces a robust, conductive, and highly detailed film on photoresist and other polymer substrates. The N-28 is the reducer that goes with the L-14 silver solution. Recommended supplementary solutions: C-22 Wetting Agent & #93 Sensitizer5-gallon pails of this item must ship as corrosive and are assessed an additional hazmat fee.
-
The L-400, N-400 system provides a slower, more controlled reaction than the L-14/N-28 suite in producing a robust, conductive, and highly detailed film on photoresist and other polymer substrates. It is useful for difficult-to-wet substrates and when an extreme degree of accuracy is required. Recommended supplementary solutions: C-22 Wetting Agent & #93 SensitizerThis item must ship as corrosive and is assessed an additional hazmat fee on gallons and larger sizes.
-
R-240 is a concentrated reducing agent for electroplating. It can be used with the S-30 silvering solution.
-
Peacock RTA-550 is a super concentrated tin-acid solution. Recommended for automated conveyorized systems and for hand sprayers. Dilute 1.5 ml to one gallon with deionized water. Shelf life > 1 year.
-
Peacock S-30 Silver Solution is a concentrated silver solution for electroplating. It can be used with the R-240 or N-28 Reducer. Available in the following sizes:
S-30 Silver Solution (1 Gallon/3.79 Liters) PEAS301G ea S-30 Silver Solution (1 Pint) PEAS301P Pint -
The sensitizer spray gun repair kit contains parts used to repair Sensitizer Spray Gun models. It contains the following parts:
Standard U-0 - U-0 Fluid Tips 1 ea Sale Standard U-203 - U-203 Packing Glands 1 ea Sale Standard U-2500 - U 2500 Springs 1 ea Sale Standard U-30 - U- 30 Springs 1 ea Sale Standard U-29 - U-29 Packing Glands 1 ea Sale Standard U-33 Springs - U-33 Springs 1 ea Sale Standard U-28-12 - U-28- 12 Packing Washers (per Dozen) 1 ea Sale Standard U-31Spring Seats - U-31 Spring Seats 1 ea Sale -
The Sensitizing Spray Gun is a single nozzle spray gun for applying sensitizer solution. It is made of a stainless steel fluid body to resist corrosion with acid solutions. One fluid coupling at fluid inlet for 1/4 inch tubing or one siphon bottle is needed.
-
Peacock Silver Antiquing Compound is used to give mirrored finishes an aged, antique tarnish. To create an antique finish, first create your mirrored finish. Sprinkle the antiquing compound onto the reflective surface (when wet or dry) and then apply the mirror backing paint. As the antiquing compound reacts with the mirror coat, it will "age" the finish.Antiquing compound must ship as a hazardous good and is assessed an additional hazmat fee.
-
Silver Nitrate crystals are used to create conductive solutions for electronics, make mirroring chemistry solutions, and create other silver-based chemistries. We sell it in the following sizes:
Silver Nitrate Crystals (16 oz/1 lb bottle) PEASILNIT16OZ 16 Oz. Silver Nitrate Crystals (250g Package) PEASILNIT250G ea Silver Nitrate Crystals (4 oz bottle) PEASILNIT4OZ 4 oz bottl -
Peacock Silver Strip is a dry powder that is diluted with water to remove silver and copper from glass when re-silvering or removing silver deposits from the faces of mirrors. It is also used for "wipe out" techniques on silk-screened mirrors and for cleaning deposits on equipment. It does not have the fumes associated with other acids. We do offer larger sizes in this product: 50 lbs. and 125 lbs. These sizes must ship freight and require special shipping arrangements. Please get in touch with us by phone or email if you are interested in these sizes.Antiquing compound must ship as hazardous goods and is assessed an additional hazmat fee.
-
The Standard Silvering Spray Gun is a dual-head spray gun used for spraying two materials that need to mix after spraying. Great for Chroming, Silvering Mirrors or any other dual component spraying. The wet sections are 303 Stainless Steel which allows spraying of corrosive fluids. The sprayer can be fed by siphon bottles (USP-QT), gravity fed or pressure fed from a tank. Two fluid couplings at fluid inlet, for 1/4" tubing, or two siphon bottles are needed.
-
Plastic quart siphon bottle assembly with fittings that connect it to the fluid inlets of our spray guns. Stainless steel parts for spraying corrosive liquids.
-
Sodium Hydroxide Pellets (5 Pound Bag)This item must ship as a hazmat good and is assessed an additional hazmat fee.
-
The standard spray gun repair kit contains parts used to repair the Standard Silvering Spray Gun model. It contains the following parts:
Standard U-3687 - PTFE packing assembly for silvering gun 2 ea Standard U-3664 - PTFE piston assembly for silvering gun 2 ea Standard U-3677 - Needle for new standard silvering gun 2 ea Standard U-0 - U-0 Fluid Tips 2 ea Standard U-2500 - U 2500 Springs 2 ea -
The standard spray gun repair kit contains parts used to repair older Standard Silvering Spray Gun models. It contains the following parts:
Standard U-0 - U-0 Fluid Tips 2 ea Standard AU-31/32 Needles - AU-31/32 Needles 1 ea Standard U-2 -3/8 - U-2-3/8" Needle 1 ea Standard U-2500 - U 2500 Springs 2 ea Standard U-30 - U- 30 Springs 2 ea Standard U-33 Springs - U-33 Springs 1 ea Standard U-29 - U-29 Packing Glands 2 ea Standard U-203 - U-203 Packing Glands 1 ea Standard U-28-12 - U-28- 12 Packing Washers (per Dozen) 1 ea Standard U-31Spring Seats - U-31 Spring Seats 1 ea Standard U-2505 - U 2505 Piston Assembly 1 ea -
Stannous Chloride (Tin Chloride) CrystalsThis item must ship as a hazmat good and is assessed an additional hazmat fee.
-
The PChrome Tints Pack contains 4 oz bottles of each of the follow tints: gold, copper, red, black, and blue. These tints are colorfast, will not fade, and can be mixed to make custom colors. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
-
Permalac Original, Permalac EF, Permalac NT, and Permalac 2K can also be tinted with our line of translucent tints. These tints come in 7 colors: gold, copper, yellow, red, black, violet, and blue. These tints are colorfast, will not fade, and can be mixed to make a custom patina. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
-
Permalac Original, Permalac EF, Permalac NT, and Permalac 2K can also be tinted with our line of translucent tints. These tints come in 7 colors: gold, copper, yellow, red, black, violet, and blue. These tints are colorfast, will not fade, and can be mixed to make a custom patina. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
-
Permalac Original, Permalac EF, Permalac NT, and Permalac 2K can also be tinted with our line of translucent tints. These tints come in 7 colors: gold, copper, yellow, red, black, violet, and blue. These tints are colorfast, will not fade, and can be mixed to make a custom patina. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
-
Permalac Original, Permalac EF, Permalac NT, and Permalac 2K can also be tinted with our line of translucent tints. These tints come in 7 colors: gold, copper, yellow, red, black, violet, and blue. These tints are colorfast, will not fade, and can be mixed to make a custom patina. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
-
Permalac Original, Permalac EF, Permalac NT, and Permalac 2K can also be tinted with our line of translucent tints. These tints come in 7 colors: gold, copper, yellow, red, black, violet, and blue. These tints are colorfast, will not fade, and can be mixed to make a custom patina. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
-
Permalac Original, Permalac EF, Permalac NT, and Permalac 2K can also be tinted with our line of translucent tints. These tints come in 7 colors: gold, copper, yellow, red, black, violet, and blue. These tints are colorfast, will not fade, and can be mixed to make a custom patina. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results. When used with PChrome, and to counteract the natural yellowing of top-coating silver, add 1 ml of Peacock Violet Compensating Tint for every 30 ml of the topcoat or 2K.
-
Permalac Original, Permalac EF, Permalac NT, and Permalac 2K can also be tinted with our line of translucent tints. These tints come in 7 colors: gold, copper, yellow, red, black, violet, and blue. These tints are colorfast, will not fade, and can be mixed to make a custom patina. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
