-
Permalac Original, Permalac EF, Permalac NT, and Permalac 2K can also be tinted with our line of translucent tints. These tints come in 7 colors: gold, copper, yellow, red, black, violet, and blue. These tints are colorfast, will not fade, and can be mixed to make a custom patina. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
-
Permalac Original, Permalac EF, Permalac NT, and Permalac 2K can also be tinted with our line of translucent tints. These tints come in 7 colors: gold, copper, yellow, red, black, violet, and blue. These tints are colorfast, will not fade, and can be mixed to make a custom patina. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
-
Permalac Original, Permalac EF, Permalac NT, and Permalac 2K can also be tinted with our line of translucent tints. These tints come in 7 colors: gold, copper, yellow, red, black, violet, and blue. These tints are colorfast, will not fade, and can be mixed to make a custom patina. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
-
Permalac Original, Permalac EF, Permalac NT, and Permalac 2K can also be tinted with our line of translucent tints. These tints come in 7 colors: gold, copper, yellow, red, black, violet, and blue. These tints are colorfast, will not fade, and can be mixed to make a custom patina. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
-
The standard spray gun repair kit contains parts used to repair older Standard Silvering Spray Gun models. It contains the following parts:
Standard U-0 - U-0 Fluid Tips 2 ea Standard AU-31/32 Needles - AU-31/32 Needles 1 ea Standard U-2 -3/8 - U-2-3/8" Needle 1 ea Standard U-2500 - U 2500 Springs 2 ea Standard U-30 - U- 30 Springs 2 ea Standard U-33 Springs - U-33 Springs 1 ea Standard U-29 - U-29 Packing Glands 2 ea Standard U-203 - U-203 Packing Glands 1 ea Standard U-28-12 - U-28- 12 Packing Washers (per Dozen) 1 ea Standard U-31Spring Seats - U-31 Spring Seats 1 ea Standard U-2505 - U 2505 Piston Assembly 1 ea -
The standard spray gun repair kit contains parts used to repair the Standard Silvering Spray Gun model. It contains the following parts:
Standard U-3687 - PTFE packing assembly for silvering gun 2 ea Standard U-3664 - PTFE piston assembly for silvering gun 2 ea Standard U-3677 - Needle for new standard silvering gun 2 ea Standard U-0 - U-0 Fluid Tips 2 ea Standard U-2500 - U 2500 Springs 2 ea -
The deluxe spray gun repair kit contains parts used to repair the older Deluxe Silver Spray Gun model (no longer sold). It contains the following parts:
Standard U-3687 - PTFE packing assembly for silvering gun 2 ea Standard U-3664 - PTFE piston assembly for silvering gun 2 ea Standard U-3677 - Needle for new standard silvering gun 2 ea Standard U-0 - U-0 Fluid Tips 2 ea Standard U-2500 - U 2500 Springs 2 ea -
The C-22 Wetting Agent is a concentrated solution recommended for silvering applications on hard-to-wet surfaces such as acrylics, silicone rubber, etc. This agent is usually applied prior to sensitization.
-
The #87 Degreaser Solution is a highly concentrated liquid cleaner and degreaser used for cleaning glass and plastic surfaces. It has been shown to remove hard to remove oils, organic residues, and fingerprints from a variety of ceramic, and plastic surfaces.
-
#69 Thinner is a medium speed lacquer thinner. Use when the ambient temperature is 66°F to 85°F. When spraying, thin 20%. If the Permalac is drying too quickly, and you notice blush or any other adverse effects, you can increase this to 30%. When brushing, thin 10%.UPS requires an additional hazardous materials fee for one gallon or larger containers. UPS also requires special spill-resistant packaging for one gallon or larger containers. You can avoid these fees if you order in quarts.
-
The #281 Standard & Mirror Backing Thinner is a specially-refined form of xylene for use with the Copper Tite Vehicle #3, Permalac products, and other standard backing paints. Use when the ambient temperature is 50°F to 65°F. Thin Pemalac Original, EF 20% when spraying. No thinner will be needed for brushing unless you notice brush strokes or irregularities.UPS requires an additional hazardous materials fee for one gallon or larger containers. UPS also requires special spill-resistant packaging for one gallon or larger containers. You can avoid these fees if you order in quarts.
-
Sodium Hydroxide Pellets (5 Pound Bag)This item must ship as a hazmat good and is assessed an additional hazmat fee.
-
Peacock Copper Powder is a specially prepared powder made from copper metal. Use with Copper Tite Vehicle #3 in the Peacock non-electrolytic copper mirror backing process. Recommended mix: 6 pounds Copper Powder to 4 gallons Copper Tite Vehicle #3.This item must ship as hazmat goods and is assessed an additional hazmat fee.
-
The #101 All-Purpose Surface Sanitizer Solution is an anti-microbial surface disinfectant to be used on non-wood surfaces, such as glass, plastic, and metal. Pour onto a non-wood surface directly or using a paper towel or rag. Wipe down the surface thoroughly until it is clean and dry.
-
The #175 Mirror-Backing Paint is a resilient, dark gray to black, unleaded, air-dried paint used to add an extra layer as a tough top coat over the Copper Tite Vehicle #3 (with or without copper powder). This paint cannot be applied directly to silver. Apply with the usual methods of brush, spray, roller or curtain coating. This semi-gloss paint is a high solids paste and is economical to use. May be thinned with #178 Mirror-Backing Thinner. Use a thinning ratio of between 2:1 to 1:1 paint paste to thinner. Approximate coverage is 650 Square feet per gallon.
-
Iron Powder for use with mirror backing and/or copper plating prior to mirror backing.This item must ship as a hazmat good and is assessed an additional hazmat fee.
-
The PChrome Tints Pack contains 4 oz bottles of each of the follow tints: gold, copper, red, black, and blue. These tints are colorfast, will not fade, and can be mixed to make custom colors. Tints can be mixed between 1:15 (tint to lacquer) and 1:30 ratios to yield the best results.
-
The sensitizer spray gun repair kit contains parts used to repair Sensitizer Spray Gun models. It contains the following parts:
Standard U-0 - U-0 Fluid Tips 1 ea Sale Standard U-203 - U-203 Packing Glands 1 ea Sale Standard U-2500 - U 2500 Springs 1 ea Sale Standard U-30 - U- 30 Springs 1 ea Sale Standard U-29 - U-29 Packing Glands 1 ea Sale Standard U-33 Springs - U-33 Springs 1 ea Sale Standard U-28-12 - U-28- 12 Packing Washers (per Dozen) 1 ea Sale Standard U-31Spring Seats - U-31 Spring Seats 1 ea Sale -
Peacock Silver Strip is a dry powder that is diluted with water to remove silver and copper from glass when re-silvering or removing silver deposits from the faces of mirrors. It is also used for "wipe out" techniques on silk-screened mirrors and for cleaning deposits on equipment. It does not have the fumes associated with other acids. We do offer larger sizes in this product: 50 lbs. and 125 lbs. These sizes must ship freight and require special shipping arrangements. Please get in touch with us by phone or email if you are interested in these sizes.Antiquing compound must ship as hazardous goods and is assessed an additional hazmat fee.
-
The #178 Mirror Backing Thinner is a mineral spirits blend to be used with #175 Mirror Backing Paint for reduction and clean up.UPS requires an additional hazardous materials fee for one gallon or larger containers. UPS also requires special spill-resistant packaging for one gallon or larger containers. You can avoid these fees if you order in quarts.
-
Peacock RTA-550 is a super concentrated tin-acid solution. Recommended for automated conveyorized systems and for hand sprayers. Dilute 1.5 ml to one gallon with deionized water. Shelf life > 1 year.
